BCH16 servo motor is designed to fit Lexium 16 servo drives, and belongs to Easy Lexium 16 range. This motor has a 130mm flange, with a 22mm shaft diameter. Its continuous power is 850W with high inertia. Its nominal speed is 1500rpm. It is equipped with a 2500ppr incremental encoder. Lexium 16 servo drive and BCH16 servo motor combinations are specially designed for easy integration & commissioning in your machine. It has a keyed shaft end with oil seal. The degree of protection of the shaft end and the housing is IP65. Motor shafts have degree of protection IP 65 as standard. It measures 130mm wide, 144.5mm high, 154.3mm deep and weighs 6.5kg. Easy Lexium 16 servo drive and BCH16 motor combinations are designed for easy integration and commissioning in simple machines with position control applications and low or high speed positioning, simple movement. It is compliant to standard EN/IEC 61800-5-1, and certified by CE. This motor is designed for compatibility with LXM16DU15M2X and LXM16MU15M2X servo drives. The combinations of servo motors with servo drives are based on the power class, both the servo motor and servo drive have the same power class. Easy Lexium 16 servo drive and BCH16 servo motor combinations are specially designed for easy integration & commissioning in your machine. Easy Lexium 16 servo drive and BCH16 servo motor combinations provide the right level of performance for the majority of simple motion control machines.